[Модуль] zigbee2mqtt (zigbee2mqtt)

[directman66]

Пришлите картинку в лс

[Denis_k]

Недостаточно данных для определения причины. Нужно смотреть логи z2m.

добавил часть лога, на момент добавления модуль "покраснел"

Код: Выделить всё

1585129513: /opt/zigbee2mqtt/data/log/2020-03-25.06-18-46/log.txt
debug 2020-03-25 12:43:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 12:38:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 12:33:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 12:28:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 12:23:50: Saving state to file /opt/zigbee2mqtt/data/state.json
warn 2020-03-25 12:22:18: Soft resetted ZNP due to timeout
warn 2020-03-25 12:22:17: Soft reset timeout triggered
debug 2020-03-25 12:18:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 12:13:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 12:08:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 12:03:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:58:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:53:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:48:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:43:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:38:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:33:50: Saving state to file /opt/zigbee2mqtt/data/state.json
warn 2020-03-25 11:32:17: Soft resetted ZNP due to timeout
warn 2020-03-25 11:32:17: Soft reset timeout triggered
debug 2020-03-25 11:28:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:23:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:18:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:13:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:08:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 11:03:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:58:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:53:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:48:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:43:50: Saving state to file /opt/zigbee2mqtt/data/state.json
warn 2020-03-25 10:42:17: Soft resetted ZNP due to timeout
warn 2020-03-25 10:42:16: Soft reset timeout triggered
debug 2020-03-25 10:38:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:33:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:28:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:23:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:18:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:13:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:08:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 10:03:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:58:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:53:50: Saving state to file /opt/zigbee2mqtt/data/state.json
warn 2020-03-25 09:52:16: Soft resetted ZNP due to timeout
warn 2020-03-25 09:52:16: Soft reset timeout triggered
debug 2020-03-25 09:48:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:43:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:38:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:33:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:28:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:23:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:18:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:13:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:08:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 09:03:50: Saving state to file /opt/zigbee2mqtt/data/state.json
warn 2020-03-25 09:02:16: Soft resetted ZNP due to timeout
warn 2020-03-25 09:02:15: Soft reset timeout triggered
debug 2020-03-25 08:58:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:53:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:48:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:43:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:38:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:33:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:28:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:23:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:18:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:13:50: Saving state to file /opt/zigbee2mqtt/data/state.json
warn 2020-03-25 08:12:15: Soft resetted ZNP due to timeout
warn 2020-03-25 08:12:15: Soft reset timeout triggered
debug 2020-03-25 08:08:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 08:03:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:58:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:53:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:48:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:43:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:38:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:33:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:28:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:23:50: Saving state to file /opt/zigbee2mqtt/data/state.json
info 2020-03-25 07:22:15: MQTT publish: topic 'zigbee2mqtt/0x00158d000410c4ae', payload '{"battery":91,"voltage":2985,"contact":true,"linkquality":113}'
debug 2020-03-25 07:22:15: Received Zigbee message from '0x00158d000410c4ae', type 'attributeReport', cluster 'genOnOff', data '{"onOff":0}' from endpoint 1 with groupID 0
info 2020-03-25 07:22:08: MQTT publish: topic 'zigbee2mqtt/0x00158d000410c4ae', payload '{"battery":91,"voltage":2985,"contact":false,"linkquality":118}'
debug 2020-03-25 07:22:08: Received Zigbee message from '0x00158d000410c4ae', type 'attributeReport', cluster 'genOnOff', data '{"onOff":1}' from endpoint 1 with groupID 0
debug 2020-03-25 07:18:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:13:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:08:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 07:03:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 06:58:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 06:53:50: Saving state to file /opt/zigbee2mqtt/data/state.json
info 2020-03-25 06:52:14: MQTT publish: topic 'zigbee2mqtt/0x00158d000410c4ae', payload '{"battery":91,"voltage":2985,"contact":true,"linkquality":115}'
debug 2020-03-25 06:52:14: Received Zigbee message from '0x00158d000410c4ae', type 'attributeReport', cluster 'genBasic', data '{"65281":{"1":2985,"3":30,"4":17320,"5":23,"6":[0,786445],"10":0,"100":0}}' from endpoint 1 with groupID 0
debug 2020-03-25 06:48:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 06:43:50: Saving state to file /opt/zigbee2mqtt/data/state.json
info 2020-03-25 06:42:06: MQTT publish: topic 'zigbee2mqtt/bridge/config', payload '{"version":"1.11.0","commit":"e140cf5","coordinator":{"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200128}},"log_level":"debug","permit_join":false}'
info 2020-03-25 06:42:05: Zigbee: disabling joining new devices.
debug 2020-03-25 06:42:05: Received MQTT message on 'zigbee2mqtt/bridge/config/permit_join' with data 'false'
debug 2020-03-25 06:38:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 06:33:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 06:28:50: Saving state to file /opt/zigbee2mqtt/data/state.json
debug 2020-03-25 06:23:50: Saving state to file /opt/zigbee2mqtt/data/state.json
info 2020-03-25 06:18:54: MQTT publish: topic 'homeassistant/sensor/0x00158d000410c4ae/linkquality/config', payload '{"icon":"mdi:signal","unit_of_measurement":"lqi","value_template":"{{ value_json.linkquality }}","state_topic":"zigbee2mqtt/0x00158d000410c4ae","json_attributes_topic":"zigbee2mqtt/0x00158d000410c4ae","name":"0x00158d000410c4ae_linkquality","unique_id":"0x00158d000410c4ae_linkquality_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d000410c4ae"],"name":"0x00158d000410c4ae","sw_version":"Zigbee2mqtt 1.11.0","model":"Aqara door & window contact sensor (MCCGQ11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}'
info 2020-03-25 06:18:54: MQTT publish: topic 'homeassistant/sensor/0x00158d000410c4ae/battery/config', payload '{"unit_of_measurement":"%","device_class":"battery","value_template":"{{ value_json.battery }}","state_topic":"zigbee2mqtt/0x00158d000410c4ae","json_attributes_topic":"zigbee2mqtt/0x00158d000410c4ae","name":"0x00158d000410c4ae_battery","unique_id":"0x00158d000410c4ae_battery_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d000410c4ae"],"name":"0x00158d000410c4ae","sw_version":"Zigbee2mqtt 1.11.0","model":"Aqara door & window contact sensor (MCCGQ11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}'
info 2020-03-25 06:18:54: MQTT publish: topic 'homeassistant/binary_sensor/0x00158d000410c4ae/contact/config', payload '{"payload_on":false,"payload_off":true,"value_template":"{{ value_json.contact }}","device_class":"door","state_topic":"zigbee2mqtt/0x00158d000410c4ae","json_attributes_topic":"zigbee2mqtt/0x00158d000410c4ae","name":"0x00158d000410c4ae_contact","unique_id":"0x00158d000410c4ae_contact_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d000410c4ae"],"name":"0x00158d000410c4ae","sw_version":"Zigbee2mqtt 1.11.0","model":"Aqara door & window contact sensor (MCCGQ11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}'
info 2020-03-25 06:18:54: MQTT publish: topic 'homeassistant/sensor/0x00158d00045d0200/linkquality/config', payload '{"icon":"mdi:signal","unit_of_measurement":"lqi","value_template":"{{ value_json.linkquality }}","state_topic":"zigbee2mqtt/0x00158d00045d0200","json_attributes_topic":"zigbee2mqtt/0x00158d00045d0200","name":"0x00158d00045d0200_linkquality","unique_id":"0x00158d00045d0200_linkquality_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d00045d0200"],"name":"0x00158d00045d0200","sw_version":"Zigbee2mqtt 1.11.0","model":"Aqara temperature, humidity and pressure sensor (WSDCGQ11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}'
info 2020-03-25 06:18:54: MQTT publish: topic 'homeassistant/sensor/0x00158d00045d0200/battery/config', payload '{"unit_of_measurement":"%","device_class":"battery","value_template":"{{ value_json.battery }}","state_topic":"zigbee2mqtt/0x00158d00045d0200","json_attributes_topic":"zigbee2mqtt/0x00158d00045d0200","name":"0x00158d00045d0200_battery","unique_id":"0x00158d00045d0200_battery_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d00045d0200"],"name":"0x00158d00045d0200","sw_version":"Zigbee2mqtt 1.11.0","model":"Aqara temperature, humidity and pressure sensor (WSDCGQ11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}'
info 2020-03-25 06:18:54: MQTT publish: topic 'homeassistant/sensor/0x00158d00045d0200/pressure/config', payload '{"unit_of_measurement":"hPa","device_class":"pressure","value_template":"{{ value_json.pressure }}","state_topic":"zigbee2mqtt/0x00158d00045d0200","json_attributes_topic":"zigbee2mqtt/0x00158d00045d0200","name":"0x00158d00045d0200_pressure","unique_id":"0x00158d00045d0200_pressure_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d00045d0200"],"name":"0x00158d00045d0200","sw_version":"Zigbee2mqtt 1.11.0","model":"Aqara temperature, humidity and pressure sensor (WSDCGQ11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}'
info 2020-03-25 06:18:54: MQTT publish: topic 'homeassistant/sensor/0x00158d00045d0200/humidity/config', payload '{"unit_of_measurement":"%","device_class":"humidity","value_template":"{{ value_json.humidity }}","state_topic":"zigbee2mqtt/0x00158d00045d0200","json_attributes_topic":"zigbee2mqtt/0x00158d00045d0200","name":"0x00158d00045d0200_humidity","unique_id":"0x00158d00045d0200_humidity_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d00045d0200"],"name":"0x00158d00045d0200","sw_version":"Zigbee2mqtt 1.11.0","model":"Aqara temperature, humidity and pressure sensor (WSDCGQ11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}'
info 2020-03-25 06:18:54: MQTT publish: topic 'homeassistant/sensor/0x00158d00045d0200/temperature/config', payload '{"unit_of_measurement":"°C","device_class":"temperature","value_template":"{{ value_json.temperature }}","state_topic":"zigbee2mqtt/0x00158d00045d0200","json_attributes_topic":"zigbee2mqtt/0x00158d00045d0200","name":"0x00158d00045d0200_temperature","unique_id":"0x00158d00045d0200_temperature_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d00045d0200"],"name":"0x00158d00045d0200","sw_version":"Zigbee2mqtt 1.11.0","model":"Aqara temperature, humidity and pressure sensor (WSDCGQ11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}'
info 2020-03-25 06:18:54: MQTT publish: topic 'zigbee2mqtt/bridge/config', payload '{"version":"1.11.0","commit":"e140cf5","coordinator":{"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200128}},"log_level":"debug","permit_join":true}'
info 2020-03-25 06:18:53: MQTT publish: topic 'zigbee2mqtt/0x00158d000410c4ae', payload '{"battery":91,"voltage":2985,"contact":true,"linkquality":118}'
info 2020-03-25 06:18:53: MQTT publish: topic 'zigbee2mqtt/0x00158d00045d0200', payload '{"battery":100,"voltage":3015,"temperature":23.97,"humidity":26.29,"pressure":1011.4,"linkquality":110}'
info 2020-03-25 06:18:53: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload 'online'
info 2020-03-25 06:18:53: Connected to MQTT server

[akarpych]

сделайте скрин на вкладке Parameters, где метрики OFF/ON

https://yadi.sk/d/UZsnt6_8iugGLg

[iden]

сделайте скрин на вкладке Parameters, где метрики OFF/ON

https://yadi.sk/d/UZsnt6_8iugGLg

попробуйте вручную поменять-прописать ON или OFF. У меня просто от этого метрики дублироваться стали.
Напишите как у вас после смены ON-OFF, не дублируются?

[akarpych]

сделайте скрин на вкладке Parameters, где метрики OFF/ON

https://yadi.sk/d/UZsnt6_8iugGLg

попробуйте вручную поменять-прописать ON или OFF. У меня просто от этого метрики дублироваться стали.
Напишите как у вас после смены ON-OFF, не дублируются?

Нет не дублируются!Но как добавить вторую кнопку сюда:
https://yadi.sk/i/1RLbQyCw3rQMbQ

[directman66]

сделайте скрин на вкладке Parameters, где метрики OFF/ON

https://yadi.sk/d/UZsnt6_8iugGLg

попробуйте вручную поменять-прописать ON или OFF. У меня просто от этого метрики дублироваться стали.
Напишите как у вас после смены ON-OFF, не дублируются?

Нет не дублируются!Но как добавить вторую кнопку сюда:
https://yadi.sk/i/1RLbQyCw3rQMbQ

обновитесь

[iden]

после обновления появилось и для правой клавиши

СпойлерПоказать

view_modul2.jpeg (16.21 КБ) 3254 просмотра

на самой плитке состояние меняется только от правой клавиши

метрики плодятся) теперь их по три штуки стало)))

СпойлерПоказать

Parameters3.jpeg (164.71 КБ) 3254 просмотра

[directman66]

после обновления появилось и для правой клавиши

СпойлерПоказать

view_modul2.jpeg

на самой плитке состояние меняется только от правой клавиши

метрики плодятся) теперь их по три штуки стало)))

СпойлерПоказать

Parameters3.jpeg

Пробуйте. Также добавил по аналогии 1 и 3 gang выключатели. Не забудьте обновить метрики после обновления модуля.

[akarpych]

после обновления появилось и для правой клавиши

СпойлерПоказать

view_modul2.jpeg

на самой плитке состояние меняется только от правой клавиши

метрики плодятся) теперь их по три штуки стало)))

СпойлерПоказать

Parameters3.jpeg

попробуй удалить из: $par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/right/set" ;
/right
и из: $par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/left/set" ;
/left

И удалить все строки из

Код: Выделить всё

//TS0012;
$par2['zigbeeModel'] = 'TS0012';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_left";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set";
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_left";
SQLInsert('zigbee2mqtt_devices_command', $par2);


//TS0012;
$par2['zigbeeModel'] = 'TS0012';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_right";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_right";
SQLInsert('zigbee2mqtt_devices_command', $par2);

[directman66]

после обновления появилось и для правой клавиши

СпойлерПоказать

view_modul2.jpeg

на самой плитке состояние меняется только от правой клавиши

метрики плодятся) теперь их по три штуки стало)))

СпойлерПоказать

Parameters3.jpeg

попробуй удалить из: $par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/right/set" ;
/right
и из: $par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/left/set" ;
/left

И удалить все строки из

Код: Выделить всё

//TS0012;
$par2['zigbeeModel'] = 'TS0012';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_left";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set";
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_left";
SQLInsert('zigbee2mqtt_devices_command', $par2);


//TS0012;
$par2['zigbeeModel'] = 'TS0012';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_right";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_right";
SQLInsert('zigbee2mqtt_devices_command', $par2);

все уже сделано в репозитории