[Модуль] zigbee2mqtt (zigbee2mqtt)

[IvanSH]

Прошу добавить счетчик гейгера.

А что с ним не так? Данные от него, вроде есть на вашем скрине.

Не могу название сделать, картинки нет и т. д.

[iden]

Не могу название сделать, картинки нет и т. д.

вкладка сервис Update metrics или Refresh devices и картинка будет

СпойлерПоказать

_1map.jpeg (17.96 КБ) 3332 просмотра

СпойлерПоказать

_2map.jpeg (40.85 КБ) 3332 просмотра

[V.A.S.t]

Всем привет! Возможно уже обсуждалось, но у меня вопрос: как отключить debMes? По 15 мегабайт в день набегает по всем файлам.

[kas5858]

Доброго времени суток!
1. Подскажите где поправить чтобы на выключателей подключенных к электрической сети не было батарейки?
2. Как добавить к двойным выключателям управление двумя кнопками?
3. Как правильно вставить картинку, чтобы края не обрезала?

И просьба к разработчикам, код поправить вот так.
database1.inc.php

Код: Выделить всё

// X711A https://www.zigbee2mqtt.io/devices/X711A.html
$par1['zigbeeModel'] = 'X711A';
$par1['model'] = "X711A";
$par1['type'] = "switch";
$par1['vendor'] = "Lonsonho";
$par1['description'] = "1 gang switch";
$par1['extend'] = "";
$par1['supports'] = "on/off";
$par1['fromZigbee'] = "";
$par1['toZigbee'] = "";
SQLInsert('zigbee2mqtt_devices_list', $par1);

// X712A https://www.zigbee2mqtt.io/devices/X712A.html
$par1['zigbeeModel'] = 'X712A';
$par1['model'] = "X712A";
$par1['vendor'] = "Lonsonho";
$par1['type'] = "switch";
$par1['description'] = "Smart light switch - 2 gang without neutral wire";
$par1['supports'] = "on/off";
$par1['extend'] = "";
$par1['fromZigbee'] = "";
$par1['toZigbee'] = "";
SQLInsert('zigbee2mqtt_devices_list', $par1);

// X713A https://www.zigbee2mqtt.io/devices/X713A.html
$par1['zigbeeModel'] = 'X713A';
$par1['model'] = "X713A";
$par1['vendor'] = "Lonsonho";
$par1['type'] = "switch";
$par1['description'] = "Smart light switch - 3 gang without neutral wire";
$par1['supports'] = "on/off";
$par1['extend'] = "";
$par1['fromZigbee'] = "";
$par1['toZigbee'] = "";
SQLInsert('zigbee2mqtt_devices_list', $par1);

// X701A
$par1['zigbeeModel'] = 'X701A';
$par1['model'] = "X701A";
$par1['type'] = "switch";
$par1['vendor'] = "Lonsonho";
$par1['description'] = "1 gang switch";
$par1['extend'] = "";
$par1['supports'] = "on/off";
$par1['fromZigbee'] = "";
$par1['toZigbee'] = "";
SQLInsert('zigbee2mqtt_devices_list', $par1);

// X702A
$par1['zigbeeModel'] = 'X702A';
$par1['model'] = "X702A";
$par1['type'] = "switch";
$par1['vendor'] = "Lonsonho";
$par1['description'] = "2 gang switch";
$par1['extend'] = "";
$par1['supports'] = "on/off";
$par1['fromZigbee'] = "";
$par1['toZigbee'] = "";
SQLInsert('zigbee2mqtt_devices_list', $par1);

// X703A
$par1['zigbeeModel'] = 'X703A';
$par1['model'] = "X703A";
$par1['type'] = "switch";
$par1['vendor'] = "Lonsonho";
$par1['description'] = "3 gang switch";
$par1['extend'] = "";
$par1['supports'] = "on/off";
$par1['fromZigbee'] = "";
$par1['toZigbee'] = "";
SQLInsert('zigbee2mqtt_devices_list', $par1);

database2.inc.php

Код: Выделить всё

//X711A;     https://www.zigbee2mqtt.io/devices/X711A.html
$par2['zigbeeModel'] = 'X711A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X712A
$par2['zigbeeModel'] = 'X712A';
$par2['type'] = "sensor";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['value_template'] = "click";
$par2['json_attributes'] = "";
$par2['force_update'] = "true";
$par2['command_topic'] = "";
$par2['payload_on'] = "";
$par2['payload_off'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X712A;     https://www.zigbee2mqtt.io/devices/X712A.html
$par2['zigbeeModel'] = 'X712A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
//$par2['value_template'] = "state_l1";
//$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l1/set"  ;
$par2['value_template'] = "state_right";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
//$par2['command_value'] = "state_l1";
$par2['command_value'] = "state_right";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X712A;     https://www.zigbee2mqtt.io/devices/X712A.html
$par2['zigbeeModel'] = 'X712A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_left";
//$par2['value_template'] = "state_l2";
//$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l2/set"  ;
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
//$par2['command_value'] = "state_l2";
$par2['command_value'] = "state_left";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X713A;     https://www.zigbee2mqtt.io/devices/X713A.html
$par2['zigbeeModel'] = 'X713A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
//$par2['value_template'] = "state_l1";
//$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l1/set"  ;
$par2['value_template'] = "state_right";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
//$par2['command_value'] = "state_l1";
$par2['command_value'] = "state_right";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X713A;     https://www.zigbee2mqtt.io/devices/X713A.html
$par2['zigbeeModel'] = 'X713A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
//$par2['value_template'] = "state_l2";
//$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l2/set"  ;
$par2['value_template'] = "state_right";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
//$par2['command_value'] = "state_l2";
$par2['command_value'] = "state_right";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X713A;     https://www.zigbee2mqtt.io/devices/X713A.html
$par2['zigbeeModel'] = 'X713A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
//$par2['value_template'] = "state_l3";
//$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l3/set"  ;
$par2['value_template'] = "state_right";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
//$par2['command_value'] = "state_l3";
$par2['command_value'] = "state_right";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X701A     https://www.zigbee2mqtt.io/devices/X701A.html
$par2['zigbeeModel'] = 'X701A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_l1";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l1/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_l1";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X702A     https://www.zigbee2mqtt.io/devices/X702A.html
$par2['zigbeeModel'] = 'X702A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_l1";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l1/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_l1";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X702A     https://www.zigbee2mqtt.io/devices/X702A.html
$par2['zigbeeModel'] = 'X702A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_l2";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l2/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_l2";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X703A     https://www.zigbee2mqtt.io/devices/X703A.html
$par2['zigbeeModel'] = 'X703A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_l1";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l1/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_l1";
SQLInsert('zigbee2mqtt_devices_command', $par2);

//X703A  https://www.zigbee2mqtt.io/devices/X703A.html
$par2['zigbeeModel'] = 'X703A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_l2";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l2/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_l2";
SQLInsert('zigbee2mqtt_devices_command', $par2);


//X703A  https://www.zigbee2mqtt.io/devices/X703A.html
$par2['zigbeeModel'] = 'X703A';
$par2['type'] = "switch";
$par2['state_topic'] =  "<Z2M_PATH>/<FRIENDLY_NAME>";
$par2['availability_topic'] = "<Z2M_PATH>/bridge/state";
$par2['payload_off'] = "OFF"  ;
$par2['payload_on'] = "ON"  ;
$par2['value_template'] = "state_l3";
$par2['command_topic'] = "<Z2M_PATH>/<FRIENDLY_NAME>/l3/set"  ;
$par2['json_attributes'] = "";
$par2['device_class'] = "";
$par2['unit_of_measurement'] = "";
$par2['brightness'] = "";
$par2['color_temp'] = "";
$par2['xy'] = "";
$par2['command_value'] = "state_l3";
SQLInsert('zigbee2mqtt_devices_command', $par2);

[kas5858]

С картинками вопрос решон.
Еще картинки добавьте.

[Sa1mon]

Ребят, заранее извиняюсь, если была подобная тема уже, не смог найти. Как сделать автозагрузку на вин 10 по такому же принципу, заранее спасибо:



Запуск zigbee2mqtt как сервис
Создаем файл zigbee2mqtt.service
sudo nano /etc/systemd/system/zigbee2mqtt.service
c содержимым:
[Unit]
Description=zigbee2mqtt
After=network.target

[Service]
ExecStart=/usr/bin/npm start
WorkingDirectory=/opt/zigbee2mqtt
StandardOutput=inherit
StandardError=inherit
Restart=always
User=pi

[Install]
WantedBy=multi-user.target
для запуска zigbee2mqtt необходимо выполнить:
sudo systemctl start zigbee2mqtt

systemctl status zigbee2mqtt.service

автозапуск демона при старте системы:

sudo systemctl enable zigbee2mqtt.service

[pru469]

Добрый день. Помогите разобраться с реле Zigbee OnOf Controller. Стик v3 спаривается моментально, как роутер натягивает на себя большинство устройств а вот управляться не хочет. При нажатии физической кнопки состояние в модуле меняется(On Of), что только не привязывал к свойству или методу, ни какой реакции. И еще обратил внимание, как минимум одна кнопка перескочившая на него, как роутер перестала отрабатывать.
[img]https://radikal.ru]
[img]https://radikal.ru]
[img]https://radikal.ru]
[img]https://radikal.ru]

[kas5858]

Добрый день. Помогите разобраться с реле Zigbee OnOf Controller. Стик v3 спаривается моментально, как роутер натягивает на себя большинство устройств а вот управляться не хочет. При нажатии физической кнопки состояние в модуле меняется(On Of), что только не привязывал к свойству или методу, ни какой реакции. И еще обратил внимание, как минимум одна кнопка перескочившая на него, как роутер перестала отрабатывать.
[img]https://radikal.ru]

Нужно выбрать в SELECTVENDOR: и SELECTTYPE:, бренд и ваше устройство.

[pru469]

Спасибо, я х.з какой бренд и модель, поставил сонофф и базик3 и заработало.

[dmsergei]

ZZZZ.png (38.02 КБ) 3055 просмотров

Почему может не показывать батарейку ?